- 非IC关键词
产品信息
|
KEWANG ELECRIC CO.,LTD |
文件編號 |
SF-SP-2000 |
|||
|
科 旺 電 子 有 限 公 司 |
發布日期 |
2009年 09月06 日 |
|||
|
SPECIFICATION 規格書 |
第A 版 |
第 3 頁 共 3 頁 |
|||
|
4.5 |
COLD TEST 耐冷試驗 |
THE JACK SHALL BE STORED AT A TEMPERATURE OF -25±3℃ FOR 96 HOURS. AND THEN IT SHALL BE SUBJECTED TO THE CONTROLLED RECOVERY CONDITIONS FOR 1 HOUR AFTER WHICH MEASUREMENT SHALL BE MADE. 放置在溫度-25±3℃中96小時后,再放置常溫常濕 中1小時來測定。 |
THERE SHALL BE NO DAMAGE ON APPEARANCE. MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED. 外觀無異常, 滿足于機械,電器性能。 |
||
|
4.6 |
HUMIDITY TEST 潮濕試驗 |
THE JACK SHALL BE STORED AT A TEMPERATURE OF 40±2℃ AND A HUMIDITY OF 90% TO 96% FOR 96 Hr. THEN THE JACK SHALL BE MAINTAINED AT STANDARD ATMOSPHERIC CONDITION FOR 1 Hr FOR OTHER PROCEDURES. 放置40±2℃.的相對濕度為90~96%Hr環境中96 小時后,再將樣版放在正常環境1小時后進行測試。 |
|
||
|
4.7 |
STANDARD ATMOSPHEIC CONDITIONS 測試標准狀態 |
UNLESS OTHERWISE SPECIFIED. THE STANDARD RANGE OF ATMOSPHERIC CONDITIONS FOR MAKING MEASUREMENTS AND TESTS ARE AS FOLLOWS: (1) AMBIENT TEMPERATURE : 5℃ TO 35℃ (2) RELATIVE HUMIDITY : 45% TO 85% (3) AIR PRESSURE : 86Kpa TO 106Kpa 在沒有指定的情況下測試溫度、濕度、氣壓如下: (1) 溫度為5~35℃. (2) 濕度為45%~85%. (3) 氣壓為86Kpa~106Kpa. |
|
||
|
4.8 |
PRACTICAL TEMPERATURE RANG 使用溫度範圍 |
-25℃~+85℃. 在-25℃~+85℃溫度內使用. |
|
||